【Experience】If you have Sian FKP 37, Would you try this Divel 12060??
1.Product Information
2.Picture Display
3.Preface
2022 should be regarded as the first year of 1:5 large-sized motorcycle building blocks.
After Lego reopens the mold, making such a large-scale motorcycle should be the product that everyone will make next.
What about domestic building blocks? Of course, this explosive series line will not be missed.
No, after a year, various large-sized motorcycles came out.
Tagore has produced four large-sized motorcycles.
As a big devil united with Sian, a must see!
Out of curiosity, We takes you to builds once.
Let's go
4.Picture of package
▼2025 pcs, the front view of the real object on a black background, the details and movable parts are introduced on the back.
Official size: 53.4*19.5*32.3, unit cm. The large brake disc has no dual colors, and the official ratio is also marked as 1:5.
5.Contents
▼The drawer type draws out 2 inner boxes, which saves money now, there is no ziplock bag, only one universal bag is used.
Each step controls 3-4 packs of building blocks, and the subcontracting of this step is reasonable.
▼Large-sized wheels in gold color matching. Similarly, the rear wheel is wide, the front wheel is narrow, and the quality is relatively hard. When installing the front wheel, you need to use some force, which is more difficult to install.
▼An instruction manual with steps to subcontract. Appearance stickers are also attached after the assembly is completed.
The printing quality of the stickers is average, and there is a slight color difference between the parts.
▼All parts are self-produced parts, and the feel is suitable. Universal latches are classified, and the latches are very tight and hard.
The disposable bowls that are usually packaged can allow the store to take a few more for storing parts, which is a good choice.
Note that the small rubber band is on the I-beam.
6.Building Process
▼The fight is over. It is also the first to assemble the display stand, and the stickers are a little larger than the parts.
▼This time the cylinder is made of transparent parts, but they are not connected together. In the same way as the M1000RR, continue to assemble on the display stand. The rubber band at step 53 will not connect until step 72.
▼ Habitually go around one more time. A 6-speed shifting gearbox. The new suspension parts are gold this time around.
▼ The two exhaust ports on the right side do not seem to be very similar, two large wheels. The single rocker arm design, the most fear is that the wheel will be crooked when it hits the ground. It doesn't look crooked, it's ok.
▼The 62 grid is very, very tight, everyone should be careful when installing, but the 63 grid is too loose and not good-looking, just pay attention. By the way, like this chain, watch the animation, it is very silky.
When installing the chain, the front 16-tooth gear should be pushed out one grid, and then pressed back after the chain is installed.
▼Before installing the panel, I did not connect the chain first, I was afraid that it would be dismantled.
The inner structure of the circular panels on both sides is different, one side is loose, and it will be corrected later.
This engine linkage is very strange, of course, it may be that I don't understand motorcycles.
▼ The front fork parts of this one also use a gold color scheme. There is no shortage of new parts.
There are also brake lines, but only 2
▼Headlight, I will install a light brick before, just to make it bright.
But why does the shape of this headlight remind me of the previous universal charger? ? ? ?
▼ Several golden racks on the side look good. But I see that the real car seems to be a "4", let's look at it later.
Since 90% of the times when I finish stitching and then stitching, the stitching will be crooked, so I usually stitch while stitching.
▼ But as you can see, this car feels like 70% of the weight is on the front of the car. When all the exterior panels are installed, it will be top-heavy and lean forward. Finally, put together multiple racing brackets to become
7.Product display
▼360-degree display of finished products
▼Chassis
8.Details
▼This time the bracket is placed on the front of the car, and the back is a single rocker arm, which is difficult to fix.
The engine is very strange. There are 2 cylinder blocks in the lower heat dissipation area and 2 cylinder blocks above. The L-shaped 90-degree angle, but the linkage mechanism is very strange. I don't know if this is the case with the real car, I haven't studied it.
▼The bottom shifts with your feet. I still remember this. I drove "Jialingzai" when I was young.
The headlights on the front of the car are not very restored. The real car does not seem to be so big. It is still the square-like lights inside the black frame.
▼This handle should be regarded as one of the most restored, and the sticker should be made of silver to make the rearview mirror.
Seeing this seat, I still remember people on the Internet saying that the boys who drive are omelettes and sausages every day.
▼The single rocker arm also made with taillights. 62 chains are very tight and good looking.
▼Looking at the two footrests next to me reminds me of the beautiful women I saw online sitting in the back seat, it really looks good.
▼ Compared with the fuel tank cap, it seems a little small.
Two oversized tailpipes.
▼The black round cover on the right side is loose, I will change it. Move the position a little to the right and find a hole to insert it.
▼The problem of the lamp brick will be one unit higher, and there are small blue circular plates on both sides. Can you change it?
▼Look at the comparison chart
9.Dynamic picture display
▼The rebound effect is Fine. Shifting is smooth. Push normal.
That's all for today.If you are interested, you also Click here to purchase!!
I'll see you next time
