IM.Master 9809 Technic Drift Sports Car----Let's us go??
▼Refinement picture display:
▼The front is the best angle + background of the car. It is worth mentioning that there is a motor combination for the dynamic version on the right, and there is an R/C in the lower right corner, which seems to be aimed at this series. Various information behind, as well as the rear angle of the car, you can also open and close the door.
The box uses a variety of craftsmanship. The lower right corner is marked with the item number 9809-2 on the silver bottom, a total of 2732pcs, 1:10 ratio, and the size is 50 × 23 × 13. There is a utility model patent product in the lower left corner, which is the wheel.
▼The drawer type pulls out 2 inner boxes, a total of 20 packs of building block parts. This time, the dynamic version is for everyone to evaluate, and the dynamic configuration is also very special. There are 4 black gold L motors directly against the wheels, and an L motor is used for door opening and closing.
At present, the manufacturer has set up the machine for step subcontracting, and it may be that the next year's package will use step subcontracting.
▼The instruction manual is clearly printed, but note that the black parts are a bit dark gray on the instruction manual.
There is a 1:1 comparison table of part length, and the technology panel has a number, which can allow everyone to distinguish between left and right.
The last page is a rare parts list.
▼The parts are all produced by ourselves, and the stickers are finally finished and then pasted. Some steps will interfere. You can turn over the corresponding stickers when assembling the final appearance.
It is strongly recommended that you connect all the motors first, test them when you turn them on, and sell them if there are any problems.
▼Four block function wheels with utility model patents. By the way, let’s learn about it, IM.Master also owns the patent of McLun.
This wheel also does not leak light, pay attention to the three holes when installing.
▼The fight is over. Starting from the base in the middle of the car body, 2 expanders are placed at the back (this is the new dynamic component), the master has only three channels, and now I have done two 1:2 expanders, so that they output on the same channel power.
Of course, it is also recommended that you test the motor during the assembly process. This is the step to be learned when assembling the dynamic version.
▼From a structural point of view, the four wheels are straight, and there is no gear connection at all. It is easy to fully output the power of the entire motor to the wheels. When you see the motor connection, it is a way to control two wheels on one side.
The structure of the chassis is very simple, and then the exterior is covered. The front cover is integrated with the instrument panel.
▼When you put together two doors, you should put them together and paste them together, and the rear wing is also very handsome.
Finally, the installation of four wheels is not difficult, the holes are not too tight, and it is easy to put together.
By the way, the dynamic version will have a lot more parts, and maybe the static version will use more parts.
▼By the way, let me mention that if you see the mark of IM.Msater on the parts, they are all newly opened molds, and they are all high-precision molds.
▼Finally, I'm going to make stickers, and show you the effect of the plain car, and the finished product will be behind it.
▼360-degree display of finished products:
▼ When I was promoting the picture, I saw that Gundam elements were added. When I saw these stickers, it was very mecha lines.
This white part is a pure white color scheme and looks nice and clean.
Two small headlights are hidden inside, and the whole effect of the front wheel eyebrows of the car is very square, and there is no line feeling.
▼From the side, the door does not interfere with other exterior parts, so the opening and closing effect is very smooth! Good reviews.
The wheel eyebrow effect of the rear wheel is relatively smooth and looks better. The big tail is also very handsome!
▼The Y-shaped exhaust at the rear is also one of the symbols of the sun god, which is good-looking.
Only some restorations have been done in the car, and the steering wheel cannot be linked. This car is not steered by servo + rack, but is steered by the power difference between the left and right wheels.
The wheels are two-layered, and there are a lot of positive small wheels that can make the car go sideways.
▼ Let's take a look first, the two channels AB can respectively control the front and rear wheels on the left and right sides to rotate in the same direction. If you find that the steering is wrong, you can switch the corresponding channel switch in the middle to the initial steering.
Pushing together means going forward or backward.
▼The electric rocking door switch, the effect is very, very good, the door is light, there is no interference, and the action is very beautiful.
By the way, if you open and close the door while driving, it is also possible.
▼ Move sideways!
Control takes time to learn how to play, and it is difficult to drift.
▼ Speaking of the difficulty of remote control, Wanzhi provides an excellent way for novices.
As long as you use the mobile app, you can click the button to choose left or right drift.
The app also provides gyroscope gameplay and programming mode. This programming is to make a program in the form of icons for the actions you want the vehicle to do, and then send it to the vehicle for execution.
That's all for today's content Welcome to Purchase Here if you want to know more details! See you in the next time!
