Review of K-Box 10511 Lamborghini Urus SUV Building Blocks on 20th Dec.
By From The Pubic of Wechat
December 20th, 2022
898 views
▼Finishing pictures show:
▼The front of the box is of course the most beautiful appearance of the car at a 45-degree angle. The color scheme of the car is black with fluorescent green, and the box also uses the same elements. The back has a side view of the car body.
▼World and Earth cover type pull open, see the two AB inside the box. A total of five bags of blocks, corresponding to five big steps.
▼ a manual, a small problem is that this yellow indicator line is too shallow, not too clear to see.
Also designed for quick assembly and quick disassembly power, that is, we can put together the finished product and then add the motor at the end.
▼ A correction page, the last three steps are the rear wheel and parts with interference (I personally think it should be the rear with a large wheel), the first step is to strengthen the front cover of the car. Two stickers
▼Open spell. 4WD power mode, using 4 generations of differential, very tight, if you test the linkage when assembled, can not turn and other problems, is the problem of this differential, did not find no need to replace the correction method.
44 steps to be the hub plate in the universal package.
▼On the motor first to test the linkage, the engine also tested.
Put them on, the chassis is almost done, and start to add some exterior parts on the chassis.
New mold opening round eyebrow, there are points before and after, we see the finished product drawing, the line is low before high.
Engine linkage is driven by the first two gears.
▼The whole frame in front is made of crosshair first, and then the appearance of the coverings are added.
Two new molded lights, the sticker is not marked on the number is it, remember to stick it first.
When I finished putting together the chassis, I found that it could not be pushed, side view, it is a forward leaning state, check, if you modify the rear wheel suspension connection, move forward a frame, you can push.
▼This center net really restores the degree of super high oh. Good-looking, is careful not to hit, will fall.
This hatchback back cover, great.
▼You can notice that the two front and rear seats are designed differently.
Basically, most of the car's front hood, the doors are modular, you can see that the 2 front doors, inset, are not a flat surface.
▼The same problem as the previous orange wheel, this wheel is sealed, can not see inside, in the installation, will be a little difficult, we also first check to find one of the three pillars inside, and the outside of the five widths of the hubcap is corresponding to the same, and then set up the hub plate corresponding to the triangle, you can relatively easy to complete the installation.
By the way, you can see that at the end there will be some more wheel-related parts, you can confirm that before the first version of this product, it should be to use ordinary wheels, the back of the new wheels replaced by this open mold, there will be interference with the rear envelope, so there is a step to amend the page.
▼Some car look first, although the finished stickers are not much.
▼Finished product 360 degree display:
Angle of view and chassis on top:
▼In this front, the center mesh is the most special design I think, and it is the first time I put it together this way. A long strip of carbon fiber stickers below and the horizontal Y stickers below the lights are actually more difficult to stick in the finished state, so I suggest you stick them on during the assembly process.
The rebound effect is very good, and handsome stance!
The front cover of the ▼car can be opened and closed, but the opening angle is limited and there is no support bar.
▼Open the front cover and you can see the engine, and of course, the parts come with their own color difference.
The wheels are the best looking wheels of the k box as I said before, except that the middle color has been changed to green.
▼The doors are very special, not a flat surface. I don't know if the lower one is an analog foot pedal, which can be adjusted in angle, and of course, the steering linkage is also there.
▼The rear cover of the car can be opened and closed as a whole, and can also be fixed at certain angles.
▼The rear lights have a good penetration effect, with dual exhaust outlets on both sides.
When you open the rear cover of the car, you will find a very large space for the battery box of the electric version.
▼Everyone can put the car into the box to display or dust.
That's all for today's content Welcome to know more Details Here if you want to know more details! See you in the next time!
Previous
Review of Inbrixx 687403 Godzilla VS. Kong building blocks on 14th Dec.
Read More
Next
Survivor's Hidden Clinic: Explore Iambrick 30902 Wrecked Plane Pharmacy Modular Buildings
Read More
