Review of T5022A Blue Plated T2 Bus Bricks Toys on 12th July

By From Official Accounts of Wechat. July 12th, 2022 657 views

We are Review a special T2 bus building block today-T5022A

1.Nice Picture show Here First:

2.T5022A-3299PCS;The front image also cannot render the texture of the real object, while the details and movable parts are introduced behind (and the newly opened wheel eyebrows are also marked).
Standard static version, you can bring your own or purchase dynamic upgrade package for remote control version upgrade, dynamic components include (L motor*2, servo motor*1, remote control*1, 2.4G lithium battery*1)

3.Drawer-style draw out 2 inner boxes, wow, the familiar ziplock bag is back.
Universal latches are packaged by category. Each step controls 3-4 packs of building blocks, and the subcontracting of this step is reasonable.
The wheel hub is a conventional style, but it will be very handsome with a scratched perforated disc + brake + outer hub cover at the back!

4.An instruction manual, with step subcontracting, a total of 9 major steps.
If you buy the dynamic version, you can test whether the motor works normally after connecting it according to the motor on the home page.
The two products with different color matching of parts of AB adopt the same manual. In the specific steps, you can choose the appearance of electroplating metal paint parts according to the color matching you buy.
The stickers will be carried out after the final completion. A total of 6 positions need to be pasted on 1 sticker.
Dynamic and static with a manual, static integrator see the same step in gray, dynamic integrator see the same step in green.

5.This L-shaped steering beam is also rare, and the exterior parts are made of electroplating metal paint by spraying process.
When the car body is docked, because of the multi-point connection, the latch is tight, and everyone should pay attention to the force point.
As a reminder, some parts you can't find can be found in the general package.

6.The rack parts of the front bridge should also pay attention to the positive relationship between the center and the cross shaft.
Remember to test the smoothness of all functions, then seal the floor and begin the appearance of the front face.

7.Dashboard stickers are spelled and pasted;
The rear cover and the top trunk are also completed, and finally the four wheels are completed. You should pay attention to the installation of the wheels. The middle one is connected by a cross shaft.

8.The finished product is displayed in 360 degrees:

Top view with chassis:

9.For the Details Parts:
There is slight color difference between electroplated metal paint parts, which should be caused by different thickness when spraying.

The rear cover opens and closes to reveal the engine.
The same way up and down, in the middle of the car door, the driver also want to go up here, I still remember when I was a child sit on the bus, bus are so, only a door.